They are in excellent condition, with only minor evidence of previous use, like small scuffs or scrapes. Otherwise, they are in perfect, functional condition.
These were previously installed in a local college library.
110-127 V, 50 or 60 Hz, subject to voltage (85-115 V at 50 Hz; 85-130 V at 60 Hz); 1400 W Dyson digital motor V4 – brushless 92,000 rpm; recommended dedicated 15 amp circuit, Low voltage = 11.7 amps at 120V, Operating temperature range: 32°– 104°F; Heater type: None; Standby power consumption: Less than 0.5 W; Polycarbonate-ABS casing; antimicrobial molded additive in facia and blades; galvanized steel back plate/mounting bracket with anti-tamper M6 machine screw; water ingress protection to IP35; double-life HEPA filter (glass fiber and fleece prelayer); bacteria removal 99.97% at 0.3 microns; touch-free infra-red activation; 12 second hand dry measurement; operation lock-out period: 30 seconds; 420 mph airspeed at apertures; 2,000m/6,561 ft. maximum altitude; operating airflow: Up to 9.25 gallons/s and up to 74.2 CFM; net weight: 18.1 lbs; dimensions: (H) 26" × (W) 12" × (D) 12" ; accreditations: Carbon Trust HACCP International NSF International P335 ADA compliant Contributes to LEED certification
115V AC, 20 Amp, 2300 Watts, 50/60 Hz, Single Phase, cULus Listed; One-piece, minimum 1/8'' (3mm) thick, white iron-casting cover; finished in high-gloss, acid-resistant, multicoat vitreous enamel; two-position, self-returning, chrome-plated air-outlet nozzle; air-inlet and -outlet openings equipped with vandal-resistant grilles; cover secured to mounting base with two concealed, vandal-resistant, recessed hex-screws. Mounting Base — 14-gauge (2mm) plated steel with four 19/64'' (7.5mm) diameter mounting holes. Motor — Universal, 1/10 hp, 6200 rpm, on resilient mounting. Sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end. Equipped with automatic thermal-overload switch. Fan — Dynamically balanced, single-inlet centrifugal fan mounted on motor shaft; directs airflow through heating element at 150 cfm. Heating Element — Coiled nickel-chrome heating element mounted in mica frame and protected by an automatic thermaloverload switch. Heating element, located on inlet side of fan, heats air without hot spots — inaccessible to vandals. Electronic Control — Infrared sensor automatically turns dryer on when hands or self-returning nozzle are held under airoutlet opening and across path of sensor. Remove hands or release self-returning nozzle from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally. 13.75" W x 10 3/8" H x 7.25" D. 30 lbs.
We are located at 36 W. Fayette Ave, Unit 1, Salt Lake City, UT 84101 (970 S, between Main and West Temple). We’re available Monday through Friday, 9am to 6pm.
We are always looking for new, unique, and different materials to reclaim and repurpose from industrial, manufacturing, and commercial businesses. Whether they are used, spent, expired, mistakes, obsolete, byproducts, excess, overstock, trash, factory seconds, blemished, scrap, returns, end of life, cancelled orders, or otherwise unwanted, contact us today to find out what landfill alternatives are available to you!